IBI Scientific DOUBLE-WIDE MINI GEL-O SUBMARINE SYSTEM 15x10cm

*Comes complete with lid, UV transmittant casting
tray (10cm), casting fixture (10cm), one 1.5mm x
27 tooth comb, comb holder, bubble level,
adjustable feet, and power cords.

SPECIFICATIONS

Height Width Length

Unit Dimensions: 7.5cm 20.0cm 28.0cm

Gel Dimensions: 15cm 10cm

CAPACITY

Maximum Sample Capacity: 36 Samples (1 Comb, 36 Samples Ea.)

Buffer Capacity: 650ml

Distance Between Electrodes: 16.0cm

Maximum Voltage: 200V

The JSB-302 is designed for nucleic acid screening electrophoresis.
The maximum suggested applied voltage for the electrophoresis of
DNA in agarose gels using the JSB-302 is 150 volts. In a 1% TBE
gel, this translates into a run time of approximately 1 hour. Lower
voltages may be used, of course, and as a general rule, a 75 volt run
will take twice as long as a 150 volt run. Higher voltages may be
used to decrease run time; however, if the unit is being operated at
higher voltages than 150 volts the heat generated during electrophoresis
may decrease sample resolution. Such artifacts may be
avoided by running the unit in a cold room or adding 1X electrophoresis
buffer “ice cubes” to keep the unit properly cooled.
The suggested run parameters for the electrophoresis of RNA in
agarose gels containing formaldehyde are 60-80 volts.

ACCESSORIES AND REPLACEMENT PARTS

CATALOG# DESCRIPTION

CS-3210 JSB-302 Casting Fixture, 10cm
GB-3210 JSB-302 Gel Bed, 10cm
CS-3205 JSB-302 Casting Fixture, 5cm
GB-3205 JSB-302 Gel Bed, 5cm
CS-3275 JSB-302 Casting Fixture, 7.5cm
GB-3275 JSB-302 Gel Bed, 7.5cm
CH-302 JSB-302 Comb Holder
HA-302-B Replacement JSB-302 Electrode Assembly-Black
HA-302-R Replacement JSB-302 Electrode Assembly-Red
JSB-302-C Replacement JSB-302 Lid w/Power Cords
SPC-M4 Replacement Jordan Power Cords
230000-00 Replacement Feet and Bubble Level

ADDITIONAL COMBS AVAILABLE

WELL SAMPLE VOLUME

CATALOG# DESCRIPTION WIDTH PER MM GEL

CSD-0808 0.8mm x 16 tooth 5.8mm 4.7μl
CSD-0813 0.8mm x 27 tooth 4.0mm 3.2μl
CSD-0818 0.8mm x 36 tooth 2.3mm 1.9μl
CSD-1508 1.5mm x 16 tooth 5.8mm 8.7μl
CSD-1513 1.5mm x 22 tooth 5.0mm 7.5μl
CSD-1518 1.5mm x 27 tooth 4.0mm 6.0μl
CSD-1533 1.5mm x 33 tooth 3.0mm 4.5μl
CSD-1536 1.5mm x 36 tooth 2.3mm 3.5μl