Add to cart IBI MP-1015 Multi-Purpose Horizontal Electrophoresis System
IBI MP-1015 Multi-Purpose Horizontal Electrophoresis System

IBI MP-1015 Multi-Purpose Horizontal Electrophoresis System

IBI MP-1015 Multi-Purpose Horizontal Electrophoresis System
Click to enlarge image(s)
IBI Scientific

MP-1015 Multi-Purpose Horizontal Electrophoresis System

IBI’s MP-1015 Multi-Purpose Gel Box (10x15cm) is a general purpose unit for both extended high-resolution linear runs as well as economical quick screens. It is equipped with recirculation ports for procedures requiring buffer recirculation. The MP-1015 IBI electrophoresis unit is constructed of durable cast acrylic, which will withstand high voltages and extreme temperatures without cracking or warping, unlike most molded units. The MP-1015 can be transformed into a quick screening unit with samples resolved in 30-60 minutes. Resolution of restriction digestions, plasmid purification, and ligation reactions are all possible with short runs. The MP-1015 is also compatible with a number of analytical and preparative combs for every horizontal electrophoresis application.

The maximum suggested applied voltage for the electrophoresis of DNA in agarose gels using the MP-1015 is 140V. In a 1% TBE gel this translates inot a run time of approximately one hour. Lower voltages may be used and as a general rule a 70V run will take twice as long as a 140V run. Higher voltages may be used to decrease run time. However, if the unit is being operated at higher voltages than 140V the heat generated during electrophoresis may decrease sample resolution. Such artifacts may be avoided by running the unit in a cold room, recirculating buffer, or adding 1X electrophoresis buffer “ice cubes” to keep the unit properly cooled. The suggested run parameters for the electrophoresis of RNA in agarose gels containing formaldehyde is 60-80V.

The IB53000 has a patented vented lid. Patent# 5,779,869.


Unit dimensions: 7.0cm (H) x 16.5cm (W) x 30.5cm (L)
Gel Dimensions: 10cm (W) x 15cm (L)
Max Sample Capacity: 80 samples (4 combs x 20 samples ea.)
Buffer Capacity: 500ml
Distance between electrodes: 27.0 cm
Max volt.:


IB53020 MP-1015 UV Transmittant Casting Tray
IB53030 MP-1015 Casting Fixture
IB53040 MP-1015 Casting System (UVT Tray w/Fixture)
IB50500 Replacement Power Cords
IB50501 Replacement Elbows
IB50503 Replacement Feet
IB50504 Replacement Bubble Level
IB50505 Replacement Tank Connector Kit
IB52200 Replacement Tank Kit: Bubble Level, Feet, Buffer Port Kit
IB52210 Replacement Buffer Port Kit
IB52220 MP-1015/MPH QuickLoader
IB53200 Replacement MP-1015 Tank
IB53300 Replacement MP-1015 Lid
IB53305 Replacement MP-1015 Electrode Assembly


IB52060 1.0mm x 10 tooth 6.3mm 6.3μl
IB52090 1.0mm x 16 tooth 3.5mm 3.5μl
IB52160 1.0mm x 20 tooth 2.6mm 2.6μl
IB52165 1.5mm x 20 tooth 2.6mm 4.5μl
IB52155 1.5mm x 22 tooth 2.6mm 3.9μl
IB52070 2.0mm x 10 tooth 6.3mm 12.6μl
8920316 2.0mm x 11 tooth, MCP** 6.3mm 12.6μl
IB53070 2.0mm x 13 tooth 4.0mm 8.0μl
IB52100 2.0mm x 16 tooth 3.5mm 7.0μl
IB52170 2.0mm x 20 tooth 2.6mm 5.2μl
IB52080 3.0mm x 10 tooth 6.3mm 18.9μl
8695108 3.0mm x 11 tooth, MCP** 6.3mm 18.9μl
IB52110 3.0mm x 16 tooth 3.5mm 10.5μl
IB52180 3.0mm x 20 tooth 2.6mm 7.8μl
IB52120 1.0mm, 2 markers, 1 sample 2.9, 81.8mm 2.9, 82.0μl
IB52130 2.0mm, 2 markers, 1 sample 2.9, 81.8mm 5.8, 163.0μl
IB53080 3.0mm, 2 markers, 1 sample 2.9, 81.8mm 8.7, 245.0μl
IB52140 1.0mm, 2 markers, 2 samples 2.9, 39.3mm 2.9, 39.0μl
IB52150 2.0mm, 2 markers, 2 samples 2.9, 39.3mm 5.8, 78.0μl
IB53090 3.0mm, 2 markers, 2 samples 2.9, 39.3mm 8.7, 117.0μl

MCP** - Multichannel Pipette Compatible
Submit a Review...
Home  ·  Products  ·  About Us  ·  Contact Us  ·  Privacy Policy  ·  Agency Partner Links
Copyright © 2008