shopping cart

Product SearchSite MapCheckoutHome

Home › SANI-SPONGE: pre-moistened sponge in a TWIRL'EM bag, 114 x 229mm, 540ml

Sales inquiries 0409077539 Call Now!

"Proudly 100% AUSTRALIAN OWNED & OPERATED!"

"BUY NOW!"

Click to enlarge image(s)

The simpler solution to surface sampling

Sponge Sampling Kits for HACCP & Environment Surface Sampling applications.

Labplas SANI-SPONGE Sampling Kits come in two forms:

Dry Sponge
TWIRL'EM® Sterile Sampling bag with write-on strip containing a dry biocide-free cellulose sponge (1.5"x3" x 5/8" when hydrated)

Wet Sponge
TWIRL'EM® Sterile Sampling bag accompanied by a foil-sealed, pre-moistened cellulose sponge, holding 10 ml of the buffer of your choice (Neutralizing buffer-sterile, DE Neutralizing buffer-sterile, Butterfield phosphate buffer-sterile or Buffered peptone water-sterile)

All Labplas SANI-SPONGE TWIRL'EM® bags come with safety tabs. The puncture-proof tabs eliminate the sharp points that can cause bag puncture and/or abrasions.

SANI- SPONGE kits are sterilized using gamma irradiation.

SANI-SPONGE: pre-moistened sponge in a TWIRL'EM bag 3mm, 76micron, 4.5 x 9inch, 114 x 229mm, 18oz, 540ml, ctn/200 (4x50)

Product Usage Instructions

SANI-SPONGE with pre-moistened sponge:
1.Remove the pre-moistened sponge from the aluminum pouch.
2.Take a sample by wiping the test surface with the hydrated sponge.
3.Tear off the top of bag along the perforation.
4.Use pull-tabs to pull open the bag. Insert the sponge.
5.Hold bag by wire ends and twirl 3 to 4 times to close, fold wire ends inward onto bag.
Note: Gloves should be worn during all sampling procedures.